IXDN414PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 833mW |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*414 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 14A |
| Input Type | Non-Inverting |
| Rise Time | 27ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 22ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.033 µs |
| Output Peak Current Limit-Nom | 14A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 14A 14A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.034 µs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDN414PI Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.Tube represents the packaging method.Configuration is supported by 1 drivers.Its recommended mounting way is Through Hole.In the absence of a power supply voltage of 4.5V~35V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.-55°C~150°C TJ is the allowed temperature range for this device.A type of Non-Inverting is used for input in this program.8 terminations constitute its foundation.Under its base part number IXD*414, various related parts can be found.Mounting the device requires Through Hole.As a result, it is configured with 8 pins when it is designed.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 18V.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.A total of 8 pins are available for component connections.This device is capable of delivering 14A current.Based on the maximum power dissipation of 833mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that 35V be set as the operating supply voltage.
IXDN414PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 833mW
IXDN414PI Applications
There are a lot of IXYS IXDN414PI gate drivers applications.
- Dual-Battery Systems
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Automotive Applications
- High power buffers
- Pulse transformer drivers
- Isolated Supplies for controller area network (CAN),
- Topologies
- DC-DC Converters
- Solar inverters
- Active filtering
