IXDN430CI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Weight | 2.299997g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2W |
| Voltage - Supply | 8.5V~35V |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*430 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Qualification Status | Not Qualified |
| Max Output Current | 30A |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2W |
| Output Current | 30A |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 20ns |
| Fall Time (Typ) | 18 ns |
| Rise / Fall Time (Typ) | 18ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 30A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 30A 30A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.039 µs |
| RoHS Status | RoHS Compliant |
IXDN430CI Overview
There is greater flexibility with the TO-220-5 package.Tube represents the package.This configuration includes 1 drivers.Through Hole is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 8.5V~35V supply voltage.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.There is a temperature range for this device of -55°C~150°C TJ.Non-Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 5 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IXD*430.In this case, Through Hole indicates how the device is to be mounted.With a supply voltage of 18V, it is designed to operate.The interface chip of the system is BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER.An output current as high as 30A can be achieved at maximum power.On the board, there are 3 component pins.30A is the maximum output current supported by the device.Its maximum power dissipation of 2W shows its power loss capacity without overheating.
IXDN430CI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 2W
IXDN430CI Applications
There are a lot of IXYS IXDN430CI gate drivers applications.
- Motor Drives
- Commercial and agricultural vehicles (CAV)
- Uninterruptible Power Supplies (UPS)
- Telecom switch mode power supplies
- UPS systems
- Power factor correction (PFC) circuits
- AC-DC Inverters
- General Purpose 3-Phase Inverter
- Video amplifiers
- Refrigerator
