IXDN502D1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Bulk |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 32 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 9 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 7.5ns 6.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.038 µs |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | RoHS Compliant |
IXDN502D1 Overview
A higher degree of flexibility is achieved by adopting its 6-VDFN Exposed Pad package.Bulk represents the package.This configuration includes 2 drivers.Surface Mount is mounted in the way of the device.In the absence of a power supply voltage of 4.5V~30V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.-55°C~150°C TJ is the allowed temperature range for this device.Non-Inverting is used as the input type.It's configured with 6 terminations.The base part number IXD*502 refers to a number of related parts.The device is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 6 pins when designing.A voltage of 15V is required for its operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.Its subcategory of MOSFET Drivers contains various useful electronic components.The board contains 6 pins for component connections.Due to its power supply of 4.5/30V, it provides an effective solution to power supply problems for a wide range of applications.In order to operate properly, the operating supply voltage should be set to 15V.
IXDN502D1 Features
Embedded in the Bulk package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
6 pins
IXDN502D1 Applications
There are a lot of IXYS IXDN502D1 gate drivers applications.
- Portable Navigation Devices
- Industrial Motor Inverter - Power Tools, Robotics
- serial peripheral interface (SPI), I2C
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-voltage isolated DC-DC converters
- Line drivers
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- LCD/LCoS/DLP portable and embedded pico projectors
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
