IXDN502PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 3mA |
| Input Type | Non-Inverting |
| Rise Time | 10ns |
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 7.5ns 6.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.038 μs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDN502PI Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.A packaging method of Tube is used.Gate drivers is configured wGate driversh 2 drivers.There is a mounting bracket in the way of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~30V.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -55°C~150°C TJ.Input type of Non-Inverting is used.It's configured with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IXD*502.Mosfet driver is mounted using the Through Hole method.Specification is for 15V supply voltage operation.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There are several useful electronic components in this subcategory of MOSFET Drivers.The board has a total of 8 component pins.Based on its power supplies of 4.5/30V, it solves the problem of power supply failure for a variety of applications.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V.
IXDN502PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN502PI Applications
There are a lot of IXYS IXDN502PI gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Active filtering
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- Motor Drives
- Isolated Gate Driver Supplies
- Industrial Modules
- UPS systems
- 3-Phase Motor Inverter Driver
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
