IXDN504D1T/R
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*504 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 10mA |
| Input Type | Non-Inverting |
| Rise Time | 16ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.05 µs |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | RoHS Compliant |
IXDN504D1T/R Overview
Its 6-VDFN Exposed Pad package is adopted for higher flexibility.Tape & Reel (TR) represents the packaging method.The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.Using a 4.5V~30V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -55°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Initially, the configuration is composed of 6 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IXD*504.The device is specifically designed to operate at 18V volts.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.Within this subcategory of MOSFET Drivers, there are several useful electronic components.On the board, there are 6 component pins.Due to its power supply of 4.5/30V, it provides an effective solution to power supply problems for a wide range of applications.
IXDN504D1T/R Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN504D1T/R Applications
There are a lot of IXYS IXDN504D1T/R gate drivers applications.
- Industrial Power Supplies
- Isolated Supplies for controller area network (CAN),
- Motor Drives
- Solar power supplies
- RGB applications
- A/D drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Head-up and Head mounted displays
- Motor Controls
- Commercial and agricultural vehicles (CAV)
