IXDN509PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*509 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 75mA |
| Input Type | Non-Inverting |
| Rise Time | 45ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 25ns 23ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.055 μs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
IXDN509PI Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.A packaging method of Tube is indicated.Configuration is supported by 1 drivers.Through Hole is mounted in the way.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~30V.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.The allowable temperature range that this device can be operated in is -55°C~150°C TJ.Non-Inverting is used as the input type.The configuration is based on 8 terminations.There are various parts that can be found under its base part number IXD*509.Mosfet driver is mounted using the Through Hole method.In order to operate, a voltage of 18V has to be applied.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.This subcategory of MOSFET Drivers has a number of useful electronic components.A board with 8 component pins is available.Due to its power supplies of 4.5/30V, it solves the power supply problem for a wide range of applications.
IXDN509PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN509PI Applications
There are a lot of IXYS IXDN509PI gate drivers applications.
- Telecom switch mode power supplies
- Pulse transformer drivers
- High power buffers
- Welding
- PCMCIA applications
- High-speed communications
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Drives
- Motor Control
