IXDN509SIAT/R
| Parameters | |
|---|---|
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*509 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 75mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Rise Time | 45ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 25ns 23ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.055 μs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Length | 4.9mm |
IXDN509SIAT/R Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tape & Reel (TR) case.Gate drivers is configured wGate driversh 1 drivers.Surface Mount is mounted in the way of the device.By using 4.5V~30V supply voltage, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.There is a temperature range for this device of -55°C~150°C TJ.Non-Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.There are various parts that can be found under its base part number IXD*509.In this case, Surface Mount indicates how the device is to be mounted.Devices have 8 pins available.A voltage of 18V is required for its operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.Mosfet driver is possible for the output current to be as low as 9A.There are various useful electronic components in its subcategory MOSFET Drivers.There are 8 component pins on the board.With its power supplies of 4.5/30V, it solves the problems of power supply for a variety of applications.
IXDN509SIAT/R Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN509SIAT/R Applications
There are a lot of IXYS IXDN509SIAT/R gate drivers applications.
- UPS systems
- Motor Control
- High current laser/LED systems
- High power buffers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Refrigerator
- Broadcast equipment
- Active filtering
