Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-5 Formed Leads |
Supplier Device Package |
TO-220-5 |
Weight |
3.000003g |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tube |
Published |
2012 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
4.5V~35V |
Number of Outputs |
1 |
Max Output Current |
9A |
Number of Channels |
1 |
Max Supply Voltage |
35V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
10μA |
Element Configuration |
Single |
Output Current |
9A |
Propagation Delay |
60 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
60 ns |
Rise Time |
22ns |
Fall Time (Typ) |
15 ns |
Turn-Off Delay Time |
60 ns |
Rise / Fall Time (Typ) |
22ns 15ns |
Channel Type |
Single |
Number of Drivers |
1 |
Driven Configuration |
Low-Side |
Gate Type |
IGBT, N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
9A 9A |
Logic Voltage - VIL, VIH |
0.8V 3V |
RoHS Status |
ROHS3 Compliant |
IXDN609CI Overview
A higher level of flexibility is provided by its TO-220-5 Formed Leads package.There is a package in the form of Tube.1 drivers are incorporated for its configuration.Gate drivers is mounted in the way of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~35V supply voltage.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -55°C~150°C TJ is allowed for this device.This program uses the input type of Non-Inverting.The mount method is Through Hole.There is a maximum output current of 9A that can be achieved.For its basis, there are 1 outputs integrated.The output current supported by the device is 9A.There is a maximum acceptable operating temperature of 125°C.Minimum operating temperatures are allowed to be -40°C.During operation, the supply voltage of 35V is its maximum value.In order for the device to operate, a supply voltage of 4.5V must be applied.The device operates on a voltage of 10μA as the supply voltage.For operation, mosfet gate drivers has 1 channels.
IXDN609CI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN609CI Applications
There are a lot of IXYS Integrated Circuits Division IXDN609CI gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Automotive Applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- Welding
- Dual-Battery Systems
- Solar inverters
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- High current laser/LED systems