IXDN609SI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC-EP |
| Weight | 540.001716mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Output Current | 2A |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 22ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 75 ns |
| Rise / Fall Time (Typ) | 22ns 15ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDN609SI Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.Tube represents the package.Configuration is supported by 1 drivers.It's mounted on the way to Surface Mount.A supply voltage of 4.5V~35V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.There is a temperature range for this device of -55°C~150°C TJ.Non-Inverting is the input type used in this program.The pins are configured with 8 when designing the chip.Mosfet driver is possible for the output current to be as low as 2A.Mosfet driver is based on a basis of 1 outputs that have been integrated.The device is capable of delivering a current of 2A.There is a maximum acceptable operating temperature of 125°C.There is a minimum operating temperature of -40°C.When the supply voltage is 35V, it is at its maximum operation.Its minimum operating voltage is 4.5V.With a voltage of 10μA, it operates with a constant current.In order to operate, it is configured with 1 channels.
IXDN609SI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN609SI Applications
There are a lot of IXYS Integrated Circuits Division IXDN609SI gate drivers applications.
- Power factor correction (PFC) circuits
- Digitally controlled power supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Pulse transformer drivers
- Dual-Battery Systems
- High frequency line drivers
- Video amplifiers
- Portable computers
- UPS systems
- Portable Media Players
