IXDR502D1B
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Bulk |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 25V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 500mA |
| Rise Time | 12ns |
| Fall Time (Typ) | 10 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~25V |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 3 Ω |
| High Side Driver | NO |
| Turn Off Time | 0.035 µs |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
IXDR502D1B Overview
As you can see, it's packaged in the way of a Bulk.There is a 6-VDFN Exposed Pad package that includes it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -55°C~125°C TA for reliable performance.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.It is a member of the IXD*502 family.A total of 6 terminations can be found in it.The operation is carried out using the 6 pins.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 2A in order to meet the operation requirements.A supply voltage of 15V leads to high efficiency.It is positioned in the direction of Surface Mount.In total, it has 6 pins.Currently, the LED driving board has 4Ohm resistance.This LED driver is configured to have a maximum supply voltage of 25V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 4.5V.
IXDR502D1B Features
Supplied from 15V
Resistance of 4Ohm
IXDR502D1B Applications
There are a lot of IXYS IXDR502D1B Power Switches ICs applications.
- Hot Swaps
- Portable Video Game Players
- PC Cards
- Portable Devices
- Wearable Devices
- Smart Phones, Feature Phones
- Hot-Swap Systems
- PC Card Hot Swap
- Wireless/Networking Cards
- USB Ports/Hubs
