JANTXV1N5307UR-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | DO-213AB, MELF (Glass) |
| Number of Pins | 2 |
| Diode Element Material | SILICON |
| Operating Temperature | -65°C~175°C |
| Packaging | Bulk |
| Published | 1999 |
| Series | Military, MIL-PRF-19500/463 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | METALLURGICALLY BONDED |
| HTS Code | 8541.10.00.70 |
| Technology | FIELD EFFECT |
| Terminal Position | END |
| Terminal Form | WRAP AROUND |
| Reference Standard | MIL-19500 |
| Function | Current Regulator |
| Qualification Status | Qualified |
| Number of Elements | 1 |
| Max Supply Voltage | 100V |
| Power Dissipation-Max | 0.5W |
| Voltage - Input | 100V Max |
| Element Configuration | Single |
| Current - Output | 2.4mA |
| Case Connection | ISOLATED |
| Accuracy | ±10% |
| Regulation Current-Nom (Ireg) | 2.4mA |
| Limiting Voltage-Max | 2V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
JANTXV1N5307UR-1 Overview
There is an inclusion of buck boost converter in the package Bulk.In the way voltage regulator is packaged, voltage regulator is in the form of a DO-213AB, MELF (Glass).The current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -65°C~175°C.As an input voltage, you will be able to input a voltage equal to 100V Max.A 2 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 2 termination.In a computer or other communication constant current regulator, 2 pins are pronged contacts that provide a signal interface.Surface Mount is responsible for mounting this current regulator.Its maximum design flexibility is due to the output current of 2.4mA.Supports the maximum supply voltage of 100V.A type of FPGA that falls under this category is the Military, MIL-PRF-19500/463 series.1 elements make up this graph.A characteristic of constant current regulator is also METALLURGICALLY BONDED.
JANTXV1N5307UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements
JANTXV1N5307UR-1 Applications
There are a lot of Microsemi Corporation JANTXV1N5307UR-1 Current Regulation/Managements applications.
- Over current monitor
- Smart battery packs
- Motor controls
- Power supply current measurement
- Over current monitor
- Engine management
- Diesel injection controls
- Over-current protection
- Suspension controls
- DC motor control
