JB15HAP-2C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Silver |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Insulation Material | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Housing Material | GLASS FILLED REINFORCED NYLON |
| Actuator Material | Polybutylene Terephthalate (PBT), Glass Filled |
| Center Contact Material | BERYLLIUM COPPER |
| Terminal Material | BRASS |
| End Contact Material | BRASS |
| Operating Temperature | -25°C~70°C |
| Packaging | Tray |
| Published | 2012 |
| Series | JB |
| JESD-609 Code | e4 |
| Feature | Process Sealed |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Color | Red |
| Additional Feature | FLAT CAP |
| Voltage - Rated DC | 24V |
| Ingress Protection | IP67 - Dust Tight, Waterproof |
| Current Rating | 125mA |
| Termination Style | PC Pin |
| Body Length or Diameter | 10.0076mm |
| Body Breadth | 10.0076 mm |
| Actuator Type | Square Button |
| Circuit | SPST-NO |
| Switch Function | Off-Mom |
| Contact Resistance | 0.05mOhm |
| Insulation Resistance | 500000000Ohm |
| Contact Current(DC)-Max | 0.125A |
| Dielectric Withstanding Voltage | 250VAC V |
| Electrical Life | 1000000 Cycle(s) |
| Throw Configuration | SPST |
| Illumination | Non-Illuminated |
| Mechanical Life | 1,000,000 Cycles |
| Switch Type | KEYPAD SWITCH |
| Operating Force | 265gf |
| Actuator Orientation | Top Actuated |
| Contact (DC) Max Rating R Load | 0.125A@24VDC |
| Outline | 10.00mm x 10.00mm |
| Contact Rating @ Voltage | 0.125A @ 24VDC |
| PCB Hole Count | 4 |
| Contact Function | OFF-(ON) |
| Switch Travel | 0.30mm |
| Solderability | WAVE |
| Actuator Height off PCB, Vertical | 14.70mm |
| Number of Switches | 1 |
| Body Height | 4.191mm |
| Length - Termination | 0.122 inch |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Ratings | Dust Tight, IP67, Waterproof |
See Relate Datesheet
