JF15RP1HC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Silver |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Insulation Material | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Housing Material | GLASS FILLED REINFORCED NYLON |
| Actuator Material | Polyamide (PA), Nylon |
| Center Contact Material | PHOSPHOR BRONZE |
| Terminal Material | BRASS |
| End Contact Material | BRASS |
| Operating Temperature | -25°C~70°C |
| Packaging | Tray |
| Published | 2012 |
| Series | JF |
| JESD-609 Code | e4 |
| Feature | Process Sealed |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Additional Feature | RECT. HSNG.&SQ. ACTU., RED LED |
| Voltage - Rated DC | 24V |
| Current Rating | 50mA |
| Termination Style | PC Pin |
| Body Length or Diameter | 22.7838mm |
| Body Breadth | 17.7038 mm |
| Actuator Type | Square Button |
| Circuit | SPST-NO |
| Switch Function | Off-Mom |
| Contact Resistance | 0.05mOhm |
| Insulation Resistance | 500000000Ohm |
| Contact Current(DC)-Max | 0.05A |
| Illumination Voltage (Nominal) | 1.7VDC |
| Illumination Type, Color | LED, Red |
| Dielectric Withstanding Voltage | 250VAC V |
| Electrical Life | 500000 Cycle(s) |
| Throw Configuration | SPST |
| Illumination | Illuminated |
| Mechanical Life | 500,000 Cycles |
| Switch Type | KEYPAD SWITCH |
| Operating Force | 300gf |
| Illumination Type | Illuminated, LED |
| Actuator Orientation | Top Actuated |
| Contact (DC) Max Rating R Load | 0.05A@24VDC |
| Outline | 22.80mm x 17.70mm |
| Contact Rating @ Voltage | 0.05A @ 24VDC |
| PCB Hole Count | 6 |
| Actuator Color | GRAY |
| Contact Function | OFF-(ON) |
| Switch Travel | 0.40mm |
| Solderability | WAVE |
| Actuator Height off PCB, Vertical | 5.08mm |
| Number of Switches | 1 |
| Washability | SOLVENT |
| Body Height | 5.715mm |
| Length - Termination | 0.236 inch |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
See Relate Datesheet
