JM38510/13503BGA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-99-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Bulk |
| Series | Military, MIL-M-38510 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 167mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | JM38510 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Nominal Supply Current | 5mA |
| Power Dissipation | 167mW |
| Slew Rate | 0.8V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 114 dB |
| Voltage - Supply, Single/Dual (±) | ±4.5V~20V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Power Supply Rejection Ratio (PSRR) | 95.92dB |
| Current - Output / Channel | 70mA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 40nA |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
JM38510/13503BGA Overview
In order to protect the op amps, a TO-99-8 Metal Can case is used. An op amp ic of the General Purpose type. A Bulk case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. Op amp ic rates 25μV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~125°C TA . You should keep the voltage gain at 120dB for the time being. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 15V. Military, MIL-M-38510 is the number that corresponds to the series of the buffer op amp.
JM38510/13503BGA Features
8 Pins
supply voltage of 15V
120dB voltage gain
JM38510/13503BGA Applications
There are a lot of Analog Devices Inc. JM38510/13503BGA Instrumentational OP Amps applications.
- Active probe
- Automatic control
- Inverse/same-phase proportional circuit
- Video data acquisition
- Micro signal measurement
- Biopotential
- Proportional counter tubes
- Computer workstations
- Tablets
- Multiplication circuits
