KA1H0165RTU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-4 Full Pack |
| Number of Pins | 4 |
| Weight | 2.829g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | FPS™ |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Max Power Dissipation | 40W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Base Part Number | KA1H0165 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 12mA |
| Power Dissipation | 40W |
| Output Current | 530mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Max Supply Current | 18mA |
| Control Features | Soft Start |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 70 % |
| Duty Cycle | 67% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 15V |
| Min Breakdown Voltage | 650V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
KA1H0165RTU Overview
This ac to dc converter is embedded in package TO-220-4 Full Pack .There is a AC/DC power converter of Tube available.A AC/DC converter of this type is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -25°C~85°C TA °C in order for it to perform properly.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.100kHz is the switching frequency.The AC/DC converter is capable of being used when the supply voltage is 10V~30V (Vcc/Vdd).There are a total of 4 terminations.A ac/dc converter with 4 pins is available.It are possible to mount thare ac dc converters by Through Hole .A member of the FPS? manufacturer family, it has the following characteristics.It is possible to search for similar acdc converters by using the KA1H0165 family.There are 1 outputs to run.Currently, the output current is set to 530mA .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 30V .Supply currents up to 18mA can be handled by this power AC DC.This power AC DC's resistance can be determined to be 8Ohm .
KA1H0165RTU Features
Packaged with TO-220-4 Full Pack
Switching Frequency at 100kHz
With 4 pins
Output Current at 530mA
Resistance : 8Ohm
KA1H0165RTU Applications
There are a lot of ON Semiconductor KA1H0165RTU AC DC Converters applications.
- Portable Apparatus
- LED Driver
- Adapter for ADSL
- Appliance Power Supplies
- AC?DC USB chargers for Cameras
- AC--DC Adapter
- MP3
- Vacuum Cleaner
- Standby power
- DVD players
