banner_page

KA2901DMTF

Surface Mount Tape & Reel (TR) 18mA mA 1.3 μs μs Linear Comparators 100dB dB 250nA pA 1.1mA μA 7mV mV Surface Mount


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-KA2901DMTF
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 345
  • Description: Surface Mount Tape & Reel (TR) 18mA mA 1.3 μs μs Linear Comparators 100dB dB 250nA pA 1.1mA μA 7mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Weight 218.3mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Power Dissipation 570mW
Base Part Number KA2901
Output Type DTL, MOS, Open-Collector, TTL
Operating Supply Voltage 36V
Number of Elements 4
Nominal Supply Current 1.1mA
Power Dissipation 570mW
Output Current 18mA
Max Supply Current 2mA
Quiescent Current 2.5mA
Response Time 1.3 μs
Voltage - Supply, Single/Dual (±) 2V~36V ±1V~18V
Output Current per Channel 18mA
Input Offset Voltage (Vos) 7mV
Voltage Gain 100dB
Max Input Current 250nA
Input Bias Current 250nA
Voltage - Input Offset (Max) 7mV @ 5V
Current - Input Bias (Max) 0.25μA @ 5V
Current - Output (Typ) 18mA @ 5V
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

KA2901DMTF Overview


For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type DTL, MOS, Open-Collector, TTL is used for this comparator.This chip is designed with the Tape & Reel (TR) package.Speaking of types, this is a typical General Purpose comparator.There are a total of 4 elements in it.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 14 pins.You can search KA2901 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 2.5mA volts.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 1.1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 2mA .You are allowed to input a maximum current of 250nA into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.In order to operate normally, a supply voltage of 0 is required.

KA2901DMTF Features


DTL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB

KA2901DMTF Applications


There are a lot of ON Semiconductor KA2901DMTF linear comparators applications.

  • Power management
  • High-Speed Sampling Circuits
  • Building automation
  • Window Comparators, Multivibrators
  • DC/DC and AC/DC power supplies
  • Appliances
  • Mobile Communications
  • Set Top Boxes
  • Current and voltage sensing
  • Infotainment and Clusters

Write a review

Note: HTML is not translated!
    Bad           Good