KA2901DTF
| Parameters | |
|---|---|
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 218.3mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | KA2901 |
| Output Type | DTL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 36V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1.1mA |
| Power Dissipation | 570mW |
| Output Current | 18mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
KA2901DTF Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type DTL, MOS, Open-Collector, TTL output on this device.This device is designed in Tape & Reel (TR) case.You can find 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.This element consists of 4 elements in total.Surface Mount universial mout for easy adapting.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .14 pins are present on the comparator.You can search KA2901 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 2.5mA volts.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 1.1mA .The compartator could be damaged if the current supply exceeds 2mA .In order to operate the device, 5V power supplies are sufficient.The maximal current your can input into the device is 250nA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 100dB .For normal operation, the operating supply voltage must be 36V .
KA2901DTF Features
DTL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
KA2901DTF Applications
There are a lot of ON Semiconductor KA2901DTF linear comparators applications.
- General Purpose Low Voltage Applications
- Pulse, Squarewave, and Time Delay Generators
- Portable and Battery-Powered Systems
- RC Timers
- Point of load regulators
- Body Control Modules
- Security Detection Systems
- Alarm and Monitoring Circuits
- Wireless Base Stations
- Battery management and protection
