KA311D
| Parameters | |
|---|---|
| Package / Case | SOP |
| Surface Mount | YES |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparators |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-COLLECTOR |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 500mW |
| Nominal Supply Current | 7.5mA |
| Max Supply Current | 7.5mA |
| Current - Output | 200pA |
| Response Time | 200 ns |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 300nA |
| Output Current per Channel | 200pA |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Length | 4.92mm |
| Width | 3.95mm |
| RoHS Status | RoHS Compliant |
KA311D Overview
The product is packaged in SOP for ease of transportation.Output type OPEN-COLLECTOR is used for this comparator.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparators family.With a 15V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator has 8 pins.Normal operation of the device requires 7.5mA supply current.A current supply greater than 7.5mA may cause the comparator to malfunction.Temperatures above 70°C are not recommended.Lower temperatures than 0°C are unsuitable for it.Compatibility is defined as 30V when the comparator is operating at its maximum supply voltage.This comparator can be supplied with a voltage as low as 5V .For the output quality to be maintained, 1 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.A 200pA output current is specified for this device.
KA311D Features
OPEN-COLLECTOR output capability
COMPARATOR amplifier
KA311D Applications
There are a lot of Fairchild (ON Semiconductor) KA311D linear comparators applications.
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators, Multivibrators
- Infotainment and Clusters
- Wearable Devices
- Pulse, Squarewave, and Time Delay Generators
- DC/DC and AC/DC power supplies
- Battery management and protection
- Point of load regulators
- Hand-Held Electronics
