KA319
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 22 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 1.62g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | KA319 |
| Output Type | DTL, Open-Collector, RTL, TTL |
| Operating Supply Voltage | 36V |
| Number of Elements | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 15V |
| Nominal Supply Current | 3.6mA |
| Power Dissipation | 500mW |
| Output Current | 25mA |
| Max Supply Current | 12.5mA |
| Quiescent Current | 3.6mA |
| Response Time | 80 ns |
| Output Current per Channel | 200nA |
| Input Offset Voltage (Vos) | 8mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 92.04dB |
| Max Input Current | 1μA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 1μA |
| Voltage - Input Offset (Max) | 8mV @ ±15V |
| Current - Input Bias (Max) | 1μA @ ±15V |
| Height Seated (Max) | 5.08mm |
| Length | 19.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
KA319 Overview
To facilitate transportation, it comes packaged in 14-DIP (0.300, 7.62mm) .There is a DTL, Open-Collector, RTL, TTL output type for this comparator.The chip is packaged with Tube .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 15V .It's a typical General Purpose comparator.In total, it contains 2 elements.Electronic comparator is recommended to mount using type Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.There are 14 pins on the comparator.If you require more pin-to-pin solutions, search KA319 for more options.There is a quiescent current of 3.6mA in this comparator.The PCB or other board can be mounted using the Through Hole on it.For normal use of the device, the nominal supply current should be 3.6mA .A current supply greater than 12.5mA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 1μA into the device.A voltage gain of 92.04dB can be determined from the voltage formula for the part.A comparator's maximum supply voltage is 36V .There is a minimum supply voltage of 15V for this comparator.Normal operation requires 36V operating supply voltage.
KA319 Features
DTL, Open-Collector, RTL, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 3.6mA
Voltage Gain: 92.04dB
KA319 Applications
There are a lot of ON Semiconductor KA319 linear comparators applications.
- Infotainment and Clusters
- Lithium ion battery monitoring
- Portable and Battery-Powered Systems
- Mobile Phones and Tablets
- Handheld Instruments
- Battery management and protection
- Metering Systems
- Power management
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Communications
