KA339ADTF
| Parameters | |
|---|---|
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 218.3mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | KA339 |
| Output Type | DTL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 36V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1.1mA |
| Power Dissipation | 570mW |
| Output Current | 18mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
KA339ADTF Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of DTL, MOS, Open-Collector, TTL is being used.This device is designed in Tape & Reel (TR) case.The comparator has 14 terminals.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .This is a 4 element comparator.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator consists of 14 pins.Try search KA339 to get more pin-to-pin solutions for your special needs.There is 2.5mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 1.1mA supply current.Current supply exceeding 2mA could cause disfunction of the compartator.A power supply of 5V is sufficient for the operation of the device.There is a maximum current that can be input into the device of 250nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .The operating supply voltage for normal operation should be 36V .
KA339ADTF Features
DTL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
KA339ADTF Applications
There are a lot of ON Semiconductor KA339ADTF linear comparators applications.
- Battery-Powered Electronics
- Mobile Phones and Tablets
- Notebooks and PDAs
- Limit Comparators
- Power management
- Industrial
- Metering Systems
- Self-diagnostics
- Lithium ion battery monitoring
- Battery-Powered Electronics
