KA339D
| Parameters | |
|---|---|
| Height Seated (Max) | 1.8mm |
| Length | 8.56mm |
| Width | 3.975mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 218.3mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | KA339 |
| Output Type | DTL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 36V |
| Number of Elements | 4 |
| Nominal Supply Current | 1.1mA |
| Power Dissipation | 570mW |
| Output Current | 18mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
KA339D Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with a DTL, MOS, Open-Collector, TTL output is used here.This chip is designed with the Tube package.The device is designed with 14 terminations.Other Comparator like the device play a important role in the industry.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.In total, it contains 4 elements.The type of mounting recommended is Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator has 14 pins.Alternatively, you may search for KA339 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 2.5mA .The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 1.1mA .Current supply exceeding 2mA could cause disfunction of the compartator.The maximal current your can input into the device is 250nA .According to the voltage formula, the part has a voltage gain of 106.02dB .In order to operate normally, a supply voltage of 0 is required.
KA339D Features
DTL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
KA339D Applications
There are a lot of ON Semiconductor KA339D linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Battery-Powered Electronics
- RC Timers
- Threshold Detectors
- Portable Battery Monitoring
- Body Control Modules
- Pulse, Squarewave, and Time Delay Generators
- Point of load regulators
- Automatic Test Equipment
- Analog front end
