KA339DTF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 218.3mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | KA339 |
| Output Type | DTL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 36V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1.1mA |
| Power Dissipation | 570mW |
| Output Current | 18mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
KA339DTF Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a DTL, MOS, Open-Collector, TTL output.Ready for shipping in Tape & Reel (TR) package.You can find 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.This is a typical comparator of type General Purpose .There are a total of 4 elements in it.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.14 pins are available on the comparator.In order to find a solution that meets your specific needs, search KA339 for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 1.1mA .A supply current exceeding 2mA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Normal operation requires 36V operating supply voltage.
KA339DTF Features
DTL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
KA339DTF Applications
There are a lot of ON Semiconductor KA339DTF linear comparators applications.
- Infotainment & cluster
- Ultra-Low Power Systems
- General-Purpose Portable Devices
- High-Speed Differential Line Receiver
- Portable Battery Monitoring
- Mobile Communications
- Window Comparators
- Self-diagnostics
- Wearable Devices
- Factory automation & control
