KA358A
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | KA358 |
| Operating Supply Voltage | 32V |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 2 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1.2mA |
| Output Current | 60mA |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 2mV |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Height | 3.4mm |
| Length | 9.6mm |
| Width | 6.4mm |
KA358A Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. A total of 8 terminations have been reported in the past few weeks. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 3mV. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 800μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 100dB. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of instrumentation amplifier is rated 32V voltage.
KA358A Features
supply voltage of 5V
100dB voltage gain
KA358A Applications
There are a lot of ON Semiconductor KA358A Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Signal filtering
- MP3
- Integrator circuits
- Signal transformation
- Exponential operation circuits
- Automotive sensors
- Biopotential
- Image computer boards
- Power transmission
