KA3883C
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Height Seated (Max) | 5.08mm |
| Length | 9.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
KA3883C Overview
It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). 7.6V~30V is the operating voltage and supply voltage of the dc control. Qualified to work in a 0°C~70°C TA dc switcher. With this switching controller, you can switch at Up to 500kHz. It is suitable for general dc dc regulator when it is set to Through Hole. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. The dc to dc regulator is limited to 25V input voltage. A value of 1A is output as the maximum value of current. In total, thare switch converters have 1 functions. Voltage regulators switching is designed with 8 pins.
KA3883C Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
PULSE WIDTH MODULATION
KA3883C Applications
There are a lot of Rochester Electronics, LLC KA3883C DC to DC converter applications.
- Geothermal power
- Special machining machine tools
- Window air conditioners
- Product burn-in
- Hydro power
- Terrestrial set-top boxes
- Automation technology
- Automatic testing equipment
- Driver circuits
- Large fire protection systems
