KA3883C
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | KA3883 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 17mA |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Length | 9.2mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
KA3883C Overview
Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 7.6V~30V and has a 7.6V~30V supply voltage. Worked in a 0°C~70°C TA dc switcher before. A switching controller such as this can switch at a value of Up to 500kHz . dc dc regulator can be generalized using Through Hole. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. An array of 8 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. A search for "KA3883" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 8. The test statistics indicate that DC regulator outputs a voltage of 5V. The dc to dc regulator can only accept 25V input voltage. You should note that the dc dc regulator's usual output current is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. 1 functions are available in total for the switch converters. With a current supply of 17mA, it runs.
KA3883C Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
KA3883C Applications
There are a lot of ON Semiconductor KA3883C DC to DC converter applications.
- Computer rooms
- Alternators
- Magnetohydrodynamic power
- Post equipment
- CMM
- Textile machinery
- Planers
- Elevator lighting
- Balance equipment
- Milling machines
