KA393A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | KA393 |
| Operating Supply Voltage | 36V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 1.04W |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.4 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
KA393A Overview
A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .This chip is designed with the Tube package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 2 elements in it.The type of mounting recommended is Through Hole .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.There are 8 pins on the comparator.You can search KA393 if you are looking for more pin-to-pin solutions.A quiescent current of 2.5mA is observed in this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normally, the nominal supply current should be 600μA when using the device.The compartator could be damaged if the current supply exceeds 1mA .This device requires 5V power supplies to operate.A voltage gain of 106.02dB can be determined from the voltage formula for the part.Comparator electronics is necessary to have an operating supply voltage of 36V for normal operation.
KA393A Features
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
KA393A Applications
There are a lot of ON Semiconductor KA393A linear comparators applications.
- General-Purpose Portable Devices
- Automotive
- Threshold Detectors
- DC/DC and AC/DC power supplies
- Infotainment and Clusters
- High-Speed Sampling Circuits
- System control and monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Point of load regulators
- Pulse, Squarewave, and Time Delay Generators
