KA393AD
| Parameters | |
|---|---|
| Package / Case | SOP |
| Surface Mount | YES |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-COLLECTOR |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 18V |
| Power Dissipation-Max | 480mW |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Current - Output | 18mA |
| Response Time | 1.4 μs |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 4mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Height Seated (Max) | 1.8mm |
| Width | 3.95mm |
| RoHS Status | RoHS Compliant |
KA393AD Overview
In order to facilitate transportation, it is packaged in SOP .The comparator has a type OPEN-COLLECTOR output.There are 8 terminals on the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.As a result, it contains 8 pins.Normally, the nominal supply current should be 1mA .If the current supply exceeds 1mA , the comparator could malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.In general, temperatures higher than 70°C are not recommended.Comparator electronics is not suComparator electronicsable for temperatures below 0°C .Comparator electronics is specified that the comparator's maximum supply voltage is 36V .The comparator is capable of operating at a minimum supply voltage of 18V .2 channels cooperate together to maintain the output quality.This comparator basically consists of a COMPARATOR amplifier with very high gain.18mA is the output current of this device.
KA393AD Features
OPEN-COLLECTOR output capability
COMPARATOR amplifier
KA393AD Applications
There are a lot of Fairchild (ON Semiconductor) KA393AD linear comparators applications.
- Analog front end
- Power management
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators, Multivibrators
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Set Top Boxes
- Wearable Devices
- Body Control Modules
- Pulse, Squarewave, and Time Delay Generators
