KA393ADTF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | KA393 |
| Operating Supply Voltage | 36V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 480mW |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.4 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
KA393ADTF Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The chip is packaged with Tape & Reel (TR) .There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .A total of 2 elements can be found in it.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator is equipped with 8 pins.Try search KA393 to get more pin-to-pin solutions for your special needs.A quiescent current of 2.5mA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 600μA .A current supply greater than 1mA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Input current to the device cannot exceed 250nA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .For normal operation, the operating supply voltage must be 36V .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
KA393ADTF Features
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
KA393ADTF Applications
There are a lot of ON Semiconductor KA393ADTF linear comparators applications.
- Infotainment and Clusters
- Battery-Powered Electronics
- DC/DC and AC/DC power supplies
- Threshold Detectors
- Motor drives
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers
- Mobile Communications
- High-Speed Sampling Circuits
- Window Comparators
