KA393S
| Parameters | |
|---|---|
| Package / Case | SIP |
| Surface Mount | NO |
| JESD-609 Code | e0 |
| Number of Terminations | 9 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparators |
| Technology | BIPOLAR |
| Terminal Position | SINGLE |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 9 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-COLLECTOR |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 18V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Current - Output | 18mA |
| Response Time | 1.4 μs |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 9mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Height Seated (Max) | 7.3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
KA393S Overview
A convenient packaging is provided in the form of SIP .Output type of this comparator is OPEN-COLLECTOR .Electronic comparator is possible to find the 9 terminals of the comparator.Electronic comparator is a component of the Comparators family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.The device is equipped with 9 pins.Normally, the nominal supply current should be 1mA when using the device.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1mA .The device can be operated with 5V power supplies.Temperature higher than 70°C is not recommended.Comparator electronics cannot be used at a temperature below 0°C .Compatibility is defined as 36V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 18V is permitted for this comparator.The output quality of 2 channels is maintained by cooperating with each other.There is essentially a very high gain COMPARATOR amplifier in the comparator.Its output current is rated as 18mA .
KA393S Features
OPEN-COLLECTOR output capability
COMPARATOR amplifier
KA393S Applications
There are a lot of Fairchild (ON Semiconductor) KA393S linear comparators applications.
- Infotainment & cluster
- Limit Comparators
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Wireless Base Stations
- Industrial
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Battery management and protection
- Alarm and Monitoring Circuits
