KAP1106E
| Parameters | |
|---|---|
| Insulation Resistance | 100000000Ohm |
| Contact Current(DC)-Max | 0.1A |
| Contact Voltage(DC)-Max | 50V |
| Dielectric Withstanding Voltage | 500VRMS V |
| Electrical Life | 2,000 Cycles |
| Mechanical Life | 2,000 Cycles |
| Contact Timing | MAKE-BEFORE-BREAK |
| Contact (DC) Max Rating R Load | 0.1A@50VDC |
| Number of Switch Sections | 6 |
| PCB Hole Count | 12 |
| Contact Function | OFF-(ON) |
| Washable | No |
| Actuator Level | Raised |
| Solderability | WAVE |
| Actuator Angle | 30 deg |
| Length | 0.661 16.80mm |
| Body Height | 10.1854mm |
| Height Above Board | 0.402 10.20mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Material | Phosphor Bronze |
| Mount | Through Hole |
| Mounting Type | Through Hole, Right Angle |
| Insulation Material | GLASS FILLED POLYESTER |
| Body Material | Polybutylene Terephthalate (PBT), Glass Filled |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| Series | KAP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Number of Positions | 6 |
| Voltage - Rated | 24VDC |
| Voltage - Rated DC | 24V |
| Pitch | 0.100 2.54mm Full |
| Current Rating | 25mA |
| Contact Finish | Gold |
| Termination Style | PC Pin |
| Body Breadth | 10.795 mm |
| Actuator Type | Piano |
| Circuit | SPST |
| Contact Resistance | 0.05mOhm |
See Relate Datesheet
