KU80386EXTC25
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 132 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Number of Terminations | 132 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 117°C |
| Operating Temperature (Min) | -40°C |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 250mA |
| Bit Size | 32 |
| Access Time | 25 μs |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of Serial I/Os | 3 |
| Number of External Interrupts | 12 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| RoHS Status | RoHS Compliant |
KU80386EXTC25 Overview
The microprocessor is convenient for international shipping since it is packaged in QFP. The packaging method Bulk provides high reliability. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. Total terminations are 132. Turning on and running the embedded microprocessor with a 5V voltage supply should be possible. An architecture based on 32 bits is used. A 25MHz frequency is used by the CPU. The datasheets for 132 pins provide details. An example of a Microprocessors embedded microprocessor. This CPU has a wide external data Bus width of 16. 132 pins are injected into the part body. There are many applications for this CPU, since it is Surface Mount mounted. Micro processors can be used from 5V. According to the datasheet, the embedded microprocessor requires 5V power supply. 5V is the CPU core voltage. The CPU can only be powered by voltages up to 250mA. Microprocessors should never be supplied with voltages above 5.5V in normalcircumstances. The lowest voltage fed to the CPU microprocessor should be 4.5V. Override -40°C in the operating environment. There're 12 external interrupts terminations to deal with hardware interrupts. 3 serial I/Os are set to communicate datas between peripherals. DMA (Direct Memory Access) is programmed using 2 channels.
KU80386EXTC25 Features
32-Bit Structure
KU80386EXTC25 Applications
There are a lot of Intel KU80386EXTC25 Microprocessor applications.
- Robotic prosthetic limbs
- X-ray
- Projectors
- Computed Tomography (CT scan)
- Information appliances (networking of household appliances)
- Volt meter
- 8. Navigation control field
- Smartphone
- Radio
- Air fryers
