KU80C188EC25
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1996 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 125mA |
| Bit Size | 16 |
| Access Time | 25 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Height Seated (Max) | 4.57mm |
| Length | 19.05mm |
| Width | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
KU80C188EC25 Overview
Packed in QFP, the microprocessor is convenient for shipping overseas. A high level of reliability is provided by using an advanced packaging method Bulk. It is a MICROPROCESSOR in terms of uPs/uCs/Peripheral ICs. In total, 100 terminations have been made. In the case of a 5V voltage supply, the embedded microprocessor should be turned on and run. In terms of architecture, it is a 16-Bit system. At 25MHz, the CPU operates. 100 pin functions are described in the datasheets. The embedded microprocessor is a typical Microprocessors. With a 8 external data bus width, this CPU has a wide data bus. Temperatures above 70°C should not allow the embedded microprocessor to operate. An injection of 100 pins is performed inside the body of the micro processor. Surface Mount mounted, this CPU is widely used in many applications. Micro processors can be used from 5V. Datasheets specify that the embedded microprocessor requires 5V power supplies. There is 5V voltage present in the CPU core. You can supply voltage 125mA higher than 125mA to the CPU. A voltage higher than 5.5V shouldn't be used in a normal situation. It is recommended that the lowest voltage be fed to the micro processor is 4.5V.
KU80C188EC25 Features
16-Bit Structure
KU80C188EC25 Applications
There are a lot of Intel KU80C188EC25 Microprocessor applications.
- Oil and gas
- Accu-check
- Safety -airbags, automatic braking system (ABS)
- Aerospace navigation systems
- Firewalls
- Electrocardiogram (EKG)
- Smart instruments
- Medical instruments
- Removable disks
- Petrochemical
