L293E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Voltage - Supply | 4.5V~36V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | L293 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 36V |
| Max Output Current | 1A |
| Operating Supply Voltage | 24V |
| Number of Channels | 4 |
| Interface | Parallel |
| Nominal Supply Current | 2mA |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Output Characteristics | 3-STATE |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 2A |
| Output Polarity | TRUE |
| Voltage - Load | 4.5V~36V |
| Output Peak Current Limit-Nom | 2A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 5.1mm |
| Length | 24.8mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L293E Overview
There is a Tubepackage included in the design.The part is packged with 20-DIP (0.300, 7.62mm) case.Mounting the part by Through Holeis recommended.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.In this case, the device can supply 4.5V~36V volts.There is a temperature range of -40°C~150°C TJin which this device operates.There is a motor type Brushed DCavailable.There are 20 terminations available in the part.At a rate of [0], voltage can be applied to the load.You should run this amplifier at 5V.Ideally, it should be mounted in the Through Holeposition.The L293part number is used to locate the part.Drivers controllers is designed wDrivers controllersh 20 pins.A supply voltage of 24V is required for the operation of this driver.In this case, the output voltage is kept at 36V volts.The motor type can be identified as Brushed.Its maximum output current reaches 1Ato meet the operational requirements.On this device, there are 4channels.
L293E Features
Applications : General Purpose
Load voltage across the chip 4.5V~36V
base on L293 number
Motor Type classified as Brushed
L293E Applications
There are a lot of STMicroelectronics L293E motor drivers applications.
- Hidden coves in high-end residential settings
- Daytime running lights (DRLs)
- Brake lights
- AM radio
- LED ballasts
- Handheld devices
- Industrial high-bay lights
- High brightness LED lighting
- Infotainment backlighting
- LCD displays
