L293N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| Voltage - Supply | 4.5V~36V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L293 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Voltage | 36V |
| Max Output Current | 2A |
| Interface | Parallel |
| Nominal Supply Current | 24mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1A |
| Max Output Voltage | 36V |
| Logic Function | AND |
| Voltage - Load | 4.5V~36V |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 24V |
| Built-in Protections | TRANSIENT; THERMAL |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
L293N Description
The L293N is a 16-pin DIP quadruple high-current half-H driver. The L293N driver is intended for use in positive supply applications with inductive loads like as relays, solenoids, DC and bipolar stepping motors, and other high current/high voltage loads. TTL is supported by all inputs. Each output is a full totem pole drive circuit with a darlington transistor sink and a pseudo darlington source.
L293N Features
? Logic Voltage: 5V
? Driver Voltage: 5-35V
? Driver Current:2A
? Logical Current:0-36mA
? Driver Model: L298N 2A
? Maximum Power (W): 25W
? Driver Chip: Double H Bridge L298N
? Motor Supply Voltage (Maximum): 46V
? Motor Supply Current (Maximum): 2A
? Current Sense for each motor
? Heatsink for better performance
? Power-On LED indicator
L293N Applications
? In Robotics
? Drive DC motors.
? Drive stepping motors
? Motor Drive & Control
? Stepper Motor Drivers
? DC Motor Drivers
? Latching Relay Drivers
The L293N is a 16-pin DIP quadruple high-current half-H driver. The L293N driver is intended for use in positive supply applications with inductive loads like as relays, solenoids, DC and bipolar stepping motors, and other high current/high voltage loads. TTL is supported by all inputs. Each output is a full totem pole drive circuit with a darlington transistor sink and a pseudo darlington source.
L293N Features
? Logic Voltage: 5V
? Driver Voltage: 5-35V
? Driver Current:2A
? Logical Current:0-36mA
? Driver Model: L298N 2A
? Maximum Power (W): 25W
? Driver Chip: Double H Bridge L298N
? Motor Supply Voltage (Maximum): 46V
? Motor Supply Current (Maximum): 2A
? Current Sense for each motor
? Heatsink for better performance
? Power-On LED indicator
L293N Applications
? In Robotics
? Drive DC motors.
? Drive stepping motors
? Motor Drive & Control
? Stepper Motor Drivers
? DC Motor Drivers
? Latching Relay Drivers
