L294
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Multiwatt-11 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 25W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L294 |
| Pin Count | 11 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 2V |
| Output Type | Bipolar |
| Supply Voltage-Max (Vsup) | 7V |
| Power Supplies | 540V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 25W |
| Output Current | 4.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~7V |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Min Input Voltage | 12V |
| Max Input Voltage | 46V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 12V~46V |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 4.5A |
| Supply Voltage1-Nom | 40V |
| Built-in Protections | OVER CURRENT; THERMAL |
| Width | 17.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L294 Overview
It is packaged in the manner of a Tube.It's included in the Multiwatt-11 (Vertical, Bent and Staggered Leads) package.The mounting type of the LED driver is Through Hole.There is a Relay, Solenoid Driver switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.As a default, the output is set to 2.To operate, it needs a supply voltage of 4.5V~7V.A maximum voltage of Bipolar volts is available from the output of this LED driver.The L294 family consists of this type.A total of 11 terminations have been recorded.It is necessary to use the 11 pins in order to operate the LED driver.It consists of 1 functions.Using a voltage of 5V allows for high efficiency.The LED driving board is mounted in the way of Through Hole.The LED driving board is equipped with a total of 11 pins.It is set to 4.5A in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The Vsup value (maximum supply voltage) is set to 7V.A normal operation requires that the supply voltage (Vsup) remain above 4.5V.In total, 1 channels are available.There is a voltage supply of 540V volts on this part.The maximum input voltage is 46V volts.As a minimum input voltage, it requires 12V volts.For its operation, a current of 5mA is required.
L294 Features
Supplied from 5V
1 channels
L294 Applications
There are a lot of STMicroelectronics L294 Power Switches ICs applications.
- Portable Music Players
- Telecom and Network Systems
- Notebook and Tablet Computers
- Handheld Devices
- HDD and SSD
- Set-Top Boxes
- Solid-State Drives
- PC Card Hot Swap
- Portable Devices
- USB Ports/Hubs
