L295
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Multiwatt-15 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 15 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 25W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | L295 |
| Pin Count | 15 |
| Number of Outputs | 2 |
| Output Voltage | 2.8V |
| Output Type | Bipolar |
| Operating Supply Voltage | 46V |
| Supply Voltage-Max (Vsup) | 10V |
| Power Supplies | 536V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 25W |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~10V |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Min Input Voltage | 12V |
| Max Input Voltage | 46V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 12V~46V |
| Driver Number of Bits | 2 |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 3A |
| Supply Voltage1-Nom | 36V |
| Built-in Protections | THERMAL |
| Height | 10.7mm |
| Length | 19.6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L295 Description
The L295 is a monolithic integrated circuit in a 15-lead Multiwatt? package; it incorporates all the functions for direct interfacing between digital circuitry and inductive loads. The L295 is designed to accept standard microprocessor logic levels at the inputs and can drive 2 solenoids. The output current is completely controlled by means of a switch-ing technique allowing very efficient operation.
Furthermore, it includes an enable input and dual supplies (for interfacing with peripherals running at a higher voltage than the logic). The L295 is particularly suitable for applications such as hammer driving in matrix printers, step motor driving and electromagnet controllers.
L295 Features
● High Current Capability (up to 2.5A per channel)
● High Voltage Operation (up to 46V for power stage)
● High Efficiency Switchmode Operation
● Regulated Output Current (adjustable)
● Few external components
● Separate logic supply
● Thermal protection
L295 Applications
● 5G Communication
● Electrification of automobile
● Industrial 4.0
The L295 is a monolithic integrated circuit in a 15-lead Multiwatt? package; it incorporates all the functions for direct interfacing between digital circuitry and inductive loads. The L295 is designed to accept standard microprocessor logic levels at the inputs and can drive 2 solenoids. The output current is completely controlled by means of a switch-ing technique allowing very efficient operation.
Furthermore, it includes an enable input and dual supplies (for interfacing with peripherals running at a higher voltage than the logic). The L295 is particularly suitable for applications such as hammer driving in matrix printers, step motor driving and electromagnet controllers.
L295 Features
● High Current Capability (up to 2.5A per channel)
● High Voltage Operation (up to 46V for power stage)
● High Efficiency Switchmode Operation
● Regulated Output Current (adjustable)
● Few external components
● Separate logic supply
● Thermal protection
L295 Applications
● 5G Communication
● Electrification of automobile
● Industrial 4.0
