L4976D013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | L4976 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Voltage | 50V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 55V |
| Voltage - Input (Min) | 8V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 50V |
| Voltage - Output (Min/Fixed) | 0.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 500mV |
| Voltage - Output (Max) | 50V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
L4976D013TR Overview
For optimal performance, this voltage regulator makes use of the Cut Tape (CT) package. During the development of this harley voltage regulator, 16 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space-saving 16-SOIC (0.295, 7.50mm Width) packages are available for this harley voltage regulator. DC DC switching regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~150°C TJ. A DC-DC switching regulator of this type operates at a switching frequency of 100kHz~300kHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 8V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.5V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 24V. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. L4976 is a family of voltage regulators that belong to the DC/DC industry. A voltage of 50V volts can be produced by voltage regulator. The switching regulator operation is carried out by 16 pins. There should be at least a 500mV volt output voltage for this switching regulator in order to make it work properly. Accordingly, dc to dc voltage regulator's maximum output current is 1A A. 50V's maximal output voltage allows adjusting voltage regulator to operate easily. A maximum voltage of 50V can be obtained from the regulator voltage. An input voltage of 55V is used to operate this harley voltage regulator.
L4976D013TR Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 55V
L4976D013TR Applications
There are a lot of STMicroelectronics L4976D013TR Voltage Regulators applications.
- Surge protection circuits
- Wind power
- Computer monitoring equipment of building
- Smart grid
- Combined machine tools
- Precision electronic equipment
- Grinders
- Injection molding machinery
- Correction machines
- Experimental setup
