L6201
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Manufacturer Package Identifier | SO20-SO20MEC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose |
| Max Power Dissipation | 900mW |
| Technology | BCDMOS |
| Voltage - Supply | 12V~48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 36V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6201 |
| Pin Count | 20 |
| Output Voltage | 60V |
| Max Output Current | 2A |
| Operating Supply Voltage | 36V |
| Number of Channels | 2 |
| Interface | Logic |
| Nominal Supply Current | 15mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 900mW |
| Output Current | 1A |
| Output Characteristics | TOTEM-POLE |
| Output Current per Channel | 1A |
| Rise Time | 300ns |
| Collector Emitter Voltage (VCEO) | 48V |
| Max Collector Current | 1A |
| Output Polarity | TRUE |
| Release Time | 400 ns |
| Input Characteristics | STANDARD |
| Voltage - Load | 12V~48V |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 300m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 30kHz |
| Built-in Protections | TRANSIENT; THERMAL |
| Motor Type | Brushed |
| Load Type | Inductive |
| Height | 2.65mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6201 Overview
Tube is used to package H bridge.H bridge is provided in the 20-SOIC (0.295, 7.50mm Width) package for the sake of cost savings.Based on 12V~48V, improved reliabilbridge drivery can be achieved.There is a mounting of H bridge circuit in Surface Mount.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.DC Motors, General Purpose is pretty useful in a variety of applications.In order to mount H gate on the PCB, Surface Mount is used.H gates specific characteristics also include Bootstrap Circuit.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 20 terminations.Signal interfaces include 20 pins that serve as pronged contacts.Its base H bridge ic number, L6201, can be used to locate other H bridge ics that are related.There is a voltage supply of 36V that is used to operate H bridge circuit.The maximum load current a power supply can provide at a specified ambient temperature is 2A.The power supply pins and the output pins are conducting a current of 1A.It is through the 20 pins that the bridge driver can perform its specific functions.Keeping the operating supply voltage at 36V ensures high efficiency.60V is the voltage released by the Hbridge.
L6201 Features
Available in 20-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6201
Number of Receivers: 36V
L6201 Applications
There are a lot of STMicroelectronics L6201 Full Bridge Drivers, Half-Bridge Drivers applications.
- PC peripherals
- Notebook Computers
- Home Appliances
- CD players
- Audio-visual equipment
- Telecom Microprocessor
- Bipolar stepper motor
- Desktop Computers
- High-Performance Gaming Motherboards
- Small Form-Factor Voltage Regulator Modules
