L6201013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose |
| Technology | BCDMOS |
| Voltage - Supply | 12V~48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 36V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6201 |
| Pin Count | 20 |
| Max Output Current | 2A |
| Operating Supply Voltage | 36V |
| Number of Channels | 2 |
| Interface | Logic |
| Nominal Supply Current | 15mA |
| Output Configuration | Half Bridge (2) |
| Output Current | 1A |
| Output Characteristics | TOTEM-POLE |
| Output Current per Channel | 1A |
| Collector Emitter Voltage (VCEO) | 48V |
| Max Collector Current | 1A |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Voltage - Load | 12V~48V |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 0.002A |
| Rds On (Typ) | 300m Ω |
| Built-in Protections | TRANSIENT; THERMAL |
| Motor Type | Brushed |
| Load Type | Inductive |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6201013TR Overview
In order to package H bridge, Tape & Reel (TR) is used.For cost-saving purposes, H bridge is included in the 20-SOIC (0.295, 7.50mm Width) package.Improved reliabilbridge drivery can be ensured based on the supply voltage of 12V~48V.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.H bridge motor driver has many applications, including DC Motors, General Purpose.PCB mounting is performed using Surface Mount.Full bridge also possesses Bootstrap Circuit as a specific characteristic.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 20 terminations are employed.Signal interfaces use 20 pins as pronged contacts.The base H bridge ic number of L6201 can be used to find related H bridge ics.A voltage of 36V is used as the supply voltage.When the ambient temperature reaches 2A, the power supply will provide the maximum load current possible.The power supply pins and the output pins are conducting a current of 1A.It is made up of two 20 pins that work together to perform the specific functions of this bridge driver.To provide high efficiency, the supply voltage is maintained at 36V.
L6201013TR Features
Available in 20-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6201
Number of Receivers: 36V
L6201013TR Applications
There are a lot of STMicroelectronics L6201013TR Full Bridge Drivers, Half-Bridge Drivers applications.
- CD players
- Dual DC motor
- Home Appliances
- High-Current DC-DC Point-of-Load Converters
- Optical disc drives
- Industrial Fans
- Voltage Regulators for GPUs
- VTR
- Voltage Regulators for DDR memory arrays
- Industrial Automation
