L6201PS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, General Purpose |
| Technology | BCDMOS |
| Voltage - Supply | 12V~48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 36V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6201 |
| Pin Count | 20 |
| Output Voltage | 60V |
| Max Output Current | 5A |
| Operating Supply Voltage | 36V |
| Number of Channels | 2 |
| Interface | Logic |
| Operating Supply Current | 15mA |
| Output Configuration | Half Bridge (2) |
| Output Current | 5A |
| Output Current per Channel | 4A |
| Rise Time | 300ns |
| Collector Emitter Voltage (VCEO) | 48V |
| Max Collector Current | 4A |
| Release Time | 400 ns |
| Voltage - Load | 12V~48V |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 300m Ω |
| Built-in Protections | THERMAL |
| Motor Type | Brushed |
| Load Type | Inductive |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6201PS Overview
In order to package H bridge, Tube is used.H bridge is provided in the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package for the sake of cost savings.Bridge driver is possible to improve the reliabilbridge drivery of 12V~48V by increasing the supply voltage.There is a mounting of H bridge circuit in Surface Mount.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.H bridge motor driver has many applications, including DC Motors, General Purpose.Surface Mount is adopted as a technique to mount H gate on the PCB.Among full bridges specific characteristics is Bootstrap Circuit.A transmission line can be terminated at a 20 termination with the H bridge whose characteristic impedance matches the transmission line.In signal interfaces, 20 pins serve as pronged contacts.Its base H bridge ic number, L6201, is used to identify related H bridge ics.The H bridge operates at a voltage of 36V.An ambient temperature of 5A determines the maximum load current that a power supply can deliver.The output pins and the power supply pins are conducting 5A current.It is through the 20 pins that the bridge driver can perform its specific functions.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 36V.In this case, the voltage released by the Hbridge is 60V.
L6201PS Features
Available in 20-SOIC (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6201
Number of Receivers: 36V
L6201PS Applications
There are a lot of STMicroelectronics L6201PS Full Bridge Drivers, Half-Bridge Drivers applications.
- Compact Blade Servers
- Voltage Regulators for CPUs
- High-Current DC-DC Point-of-Load Converters
- Dual DC motor
- Workstations
- High-Performance Gaming Motherboards
- Telecom Microprocessor
- High current, low profile DC-DC converters
- Industrial Pumps
- PC peripherals
