L6205D013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 48V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6205 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 2.8A |
| Voltage - Load | 8V~52V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6205D013TR Overview
The package is designed with [0].Drivers controllers is packaged wDrivers controllersh a 20-SOIC (0.295, 7.50mm Width) case.Drivers controllers is recommended to mount the part by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.This device is capable of supplying voltages up to 8V~52V volts.In terms of operating temperature, it falls within the range -25°C~125°C TJ.The motor type can be classified as Brushed DC.The part has 20terminations available.A voltage of 8V~52Vcan be applied to the load.I would like to remind you that this amplifier should be operated at 48V.A Surface Mountmounting method is recommended for this product.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.According to the L6205part number, the part is found.In this device, there are 20 pins.There are 4 outputs available.A voltage of 48V is used as the supply voltage for this driver.Continually maintains the output voltage at 52V.In this case, STSPIN L62is maintained as the output voltage.For compliance with the operation requirements, the maximum output current is [0].Controller ic has 2channels.
L6205D013TR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6205 number
designed with 4 outputs
L6205D013TR Applications
There are a lot of STMicroelectronics L6205D013TR motor drivers applications.
- High brightness LED lighting
- LED bias
- Commercial office
- Step-up or step-down driver topologies
- Industrial high-bay lights
- Emergency lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Mobile phone display backlight and key light driving
- Large outdoor LED display
- Hospitality buildings
