L6205PD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 48V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6205 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 2.8A |
| Rise Time | 250ns |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Release Time | 550 ns |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6205PD Overview
The design includes a package of type [0].Drivers controllers is packaged wDrivers controllersh a 20-SOIC (0.433, 11.00mm Width) Exposed Pad case.Ideally, the part should be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.The device is capable of supplying a voltage of 8V~52V volts.This device operates at a temperature range of -25°C~125°C TJ.There is a motor type Brushed DCavailable.In this part, there are 20 terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 48V.There is a recommended mounting method of Surface Mount.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in this device.Based on the L6205part number, it is found.20pins are present on the device.In the Motion Control Electronicsseries, it is included.A total of 4outputs are available.A voltage of 48V is used as the supply voltage for this driver.A constant voltage is maintained at 52V.Keeps the output voltage at STSPIN L62at all times.Brushedrepresents the motor type.In order to meet operation requirements, its maximum output current reaches [0].Controller ic uses 10mAas the supply current for Controller ics operation.On this device, there are 2channels.
L6205PD Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6205 number
designed with 4 outputs
Motor Type classified as Brushed
L6205PD Applications
There are a lot of STMicroelectronics L6205PD motor drivers applications.
- PDAs
- Human-centric lighting
- Telltale lights
- Footwell lighting
- Accurate LED current matching
- Smart lighting applications
- High power LED street light
- Tunnel lights
- Dome
- Side marker lights
