L6205PD013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 48V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6205 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 2.8A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6205PD013TR Overview
Drivers controllers is designed with Tape & Reel (TR) package.20-SOIC (0.433, 11.00mm Width) Exposed Padcases are included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.Fits the component connected to General Purpose.There is a possibility of providing 8V~52Vvolts through the device.This device operates at a temperature of -25°C~125°C TJ.In this case, the motor type is Brushed DC.There are 20 terminations available on this part.At a rate of [0], voltage can be applied to the load.This amplifier should be operated at 48V.Surface Mountis the recommended mounting method.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.L6205is the part number that finds it.The device has 20 pins.A total of 4outputs are available.There is 48V supply voltage required for this driver.Drivers controllers is maintained at a voltage of STSPIN L62.A motor type of Brushedcan be recognized.The maximum output current reaches 5.6Ato meet the operating requirements.In order to operate it, 10mAsupply current is used.Controller ic has 2channels.
L6205PD013TR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6205 number
designed with 4 outputs
Motor Type classified as Brushed
L6205PD013TR Applications
There are a lot of STMicroelectronics L6205PD013TR motor drivers applications.
- Turn signals
- LED ballasts
- drivers for outdoor application
- parking lights
- Brake lights
- Industrial high-bay lights
- Hospitality buildings
- Dash
- LED bias
- General lighting
