L6206PD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, Stepper Motors, Voltage Regulators |
| Subcategory | Motion Control Electronics |
| Technology | BCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6206 |
| Pin Count | 36 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 4 |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 5mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 2.8A |
| Output Current per Channel | 2.8A |
| Rise Time | 250ns |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Release Time | 550 ns |
| Voltage - Load | 8V~52V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| Motor Type | Brushed |
| Current - Peak Output | 5.6A |
| Load Type | Inductive |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6206PD Overview
Packaged using Tube.A cost-saving measure is taken to include H bridge in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.With the 8V~52V supply voltage, improved reliabilbridge drivery can be achieved.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -25°C~125°C TJ to operate normally at motor driver H bridges operating temperature.H bridge motor driver has many applications, including DC Motors, Stepper Motors, Voltage Regulators.Mount the board using Surface Mount.In addH gateion to Bootstrap Circuit, H gate has the following specific characteristics.36 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.Signal interfaces include 36 pins that serve as pronged contacts.The base H bridge ic number of L6206 allows you to find more related H bridge ics by using that number.With a supply voltage of 48V, H bridge circuit operates.The analog IC type is STEPPER MOTOR CONTROLLER.At a specified ambient temperature, 5.6A is the maximum load current that a power supply can provide.Amount of current that reaches 5.6A at maximum output.Through the pins of the power supply and output, there is a current of 2.8A.36 pins are work together to help this bridge driver play its specific functions.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.To ensure high efficiency, the operating supply voltage is maintained at 48V.Hbridge 52V releases voltage.
L6206PD Features
Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6206
Subcategory: 5.6A
Number of Receivers: 48V
L6206PD Applications
There are a lot of STMicroelectronics L6206PD Full Bridge Drivers, Half-Bridge Drivers applications.
- Bipolar stepper motor
- Voltage Regulators for DDR memory arrays
- Optical disc drives
- OA equipments
- DVD players
- Workstations
- DC-DC Converters
- High-Current DC-DC Point-of-Load Converters
- Industrial Automation
- PC peripherals
