L6206PD013TR
| Parameters | |
|---|---|
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 2.8A |
| Output Current per Channel | 2.8A |
| Voltage - Load | 8V~52V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| Load Type | Inductive |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, Stepper Motors, Voltage Regulators |
| Subcategory | Motion Control Electronics |
| Technology | BCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6206 |
| Pin Count | 36 |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
L6206PD013TR Overview
It is packaged with Tape & Reel (TR).As a cost-saving measure, H bridge is included in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.Based on the supply voltage of 8V~52V, improved reliabilbridge drivery can be ensured.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge is possible for -25°C~125°C TJ to operate normally at motor driver H bridges operating temperature.A number of applications can be made use of H bridge motor driver, including DC Motors, Stepper Motors, Voltage Regulators.The board is mounted using Surface Mount.Full bridge also possesses Bootstrap Circuit as a specific characteristic.It is possible to terminate a transmission line with a 36 termination using the H bridge which matches the characteristic impedance of the transmission line.Signal interfaces include 36 pins that serve as pronged contacts.Based on its base H bridge ic number of L6206, further related H bridge ics can be identified.The H bridge is powered by a voltage supply of 48V.H bridge circuit incorporates STEPPER MOTOR CONTROLLER as its analog IC type.When the ambient temperature reaches 5.6A, the maximum load current of the power supply is reached.A current of 2.8A flows through the pins of the output and power supply.A bridge driver's 36 pins work together in order to perform its specific functions.It is equipped with 4 outputs.This H bridge motor driver falls under the subcategory of Motion Control Electronics. It is similar to other parts within that category.It is important to maintain the operating supply voltage at 48V in order to ensure high efficiency.A voltage of 52V is released by the Hbridge.
L6206PD013TR Features
Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6206
Number of Receivers: 48V
L6206PD013TR Applications
There are a lot of STMicroelectronics L6206PD013TR Full Bridge Drivers, Half-Bridge Drivers applications.
- CD players
- Workstations
- Voltage Regulators for DDR memory arrays
- High-Performance Gaming Motherboards
- Optical disc drives
- OA equipments
- Bipolar stepper motor
- Voltage Regulators
- Compact Blade Servers
- PC peripherals
