L6207D013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 340mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, Stepper Motors, Voltage Regulators |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6207 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 2.8A |
| Output Current per Channel | 2.8A |
| Voltage - Load | 8V~52V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| Load Type | Inductive |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6207D013TR Overview
For packaging, it is used with Tape & Reel (TR).A cost-saving measure is taken to include H bridge in the 24-SOIC (0.295, 7.50mm Width) package.Bridge driver is possible to improve the reliabilbridge drivery of 8V~52V by increasing the supply voltage.Surface Mount is mounted on H bridge circuit.Motor driver H bridge is possible for -25°C~125°C TJ to operate normally at motor driver H bridges operating temperature.A number of applications can be made use of H bridge motor driver, including DC Motors, Stepper Motors, Voltage Regulators.On PCBs, Surface Mount mounts H gate.H gates specific characteristics also include Bootstrap Circuit.24 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.In a signal interface, the 24 pins serve as pronged contacts.This H bridge ic has a base H bridge ic number of L6207 which allows more related H bridge ics to be identified.H bridge circuit operates with the supply voltage of 48V.IC type STEPPER MOTOR CONTROLLER is used as H bridge circuit's analog IC.A power source can supply a maximum load current of 5.6A when the ambient temperature is specified.Currently, 2.8A current flows through the output and power supply pins.It is through the 24 pins that the bridge driver can perform its specific functions.It is equipped with outputs in the form of 4.H bridge motor drivers in the subcategory Motion Control Electronics have a wide range of similarities.To ensure high efficiency, the operating supply voltage is maintained at 48V.The Hbridge emits a voltage of 52V.
L6207D013TR Features
Available in 24-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6207
Number of Receivers: 48V
L6207D013TR Applications
There are a lot of STMicroelectronics L6207D013TR Full Bridge Drivers, Half-Bridge Drivers applications.
- Home Appliances
- Industrial Automation
- Voltage Regulators
- Audio-visual equipment
- Non-V-Core
- High-Current DC-DC Point-of-Load Converters
- Voltage Regulators for GPUs
- Industrial Fans
- V-Core
- Desktop Computers
