Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
Number of Pins |
36 |
Operating Temperature |
-25°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e3 |
Feature |
Bootstrap Circuit |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
36 |
ECCN Code |
EAR99 |
Resistance |
300mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Applications |
DC Motors, Stepper Motors, Voltage Regulators |
Subcategory |
Motion Control Electronics |
Technology |
DMOS |
Voltage - Supply |
8V~52V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
48V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
L6207 |
Pin Count |
36 |
Number of Outputs |
4 |
Output Voltage |
52V |
Max Output Current |
5.6A |
Operating Supply Voltage |
48V |
Supply Voltage-Min (Vsup) |
8V |
Number of Channels |
2 |
Interface |
Logic |
Analog IC - Other Type |
STEPPER MOTOR CONTROLLER |
Operating Supply Current |
10mA |
Output Configuration |
Half Bridge (4) |
Output Current |
2.8A |
Output Current per Channel |
2.8A |
Rise Time |
250ns |
Collector Emitter Voltage (VCEO) |
52V |
Max Collector Current |
2.8A |
Release Time |
550 ns |
Voltage - Load |
8V~52V |
Fault Protection |
Current Limiting, Over Temperature, UVLO |
Rds On (Typ) |
300m Ω |
Motor Type |
Brushed |
Current - Peak Output |
5.6A |
Load Type |
Inductive |
Height |
3.3mm |
Length |
16mm |
Width |
11.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
L6207PD Overview
For packaging, Tube is used.Cost savings are achieved by including H bridge in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.The supply voltage of 8V~52V can improve reliabilbridge drivery.In Surface Mount, H bridge circuit is mounted.Motor driver H bridge works normally at -25°C~125°C TJ's operating temperature.This tool is useful for a number of applications, including DC Motors, Stepper Motors, Voltage Regulators.PCB mounting is performed using Surface Mount.Bootstrap Circuit is one of full bridges specific characteristics.Transmission lines are terminated with 36 terminations with the H bridge that matches their characteristic impedance.An interface using 36 pins is used to provide pronged contact.This H bridge ic has a base H bridge ic number of L6207 which allows more related H bridge ics to be identified.This H bridge operates with a voltage of 48V.IC type STEPPER MOTOR CONTROLLER is used as H bridge circuit's analog IC.An ambient temperature of 5.6A determines the maximum load current that a power supply can deliver.Output reaches 5.6A at the maximum current.Currently, 2.8A current flows through the output and power supply pins.It is through 36 pins that this bridge driver is able to perform its specific functions.There are 4 outputs on this Hbridge.This H bridge motor driver falls under the subcategory of Motion Control Electronics.A high degree of efficiency is achieved by maintaining the operating supply voltage at 48V.The voltage released by the Hbridge is 52V.
L6207PD Features
Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6207
Subcategory: 5.6A
Number of Receivers: 48V
L6207PD Applications
There are a lot of STMicroelectronics L6207PD Full Bridge Drivers, Half-Bridge Drivers applications.
- V-Core
- Compact Blade Servers
- OA equipments
- High current, low profile DC-DC converters
- Voltage Regulators for CPUs
- Industrial Automation
- Voltage Regulators
- Telecom Microprocessor
- Workstations
- Small Form-Factor Voltage Regulator Modules