L6207PD013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, Stepper Motors, Voltage Regulators |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6207 |
| Pin Count | 36 |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 2.8A |
| Output Current per Channel | 2.8A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Voltage - Load | 8V~52V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| Motor Type | Brushed |
| Current - Peak Output | 5.6A |
| Load Type | Inductive |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6207PD013TR Overview
For packaging, Tape & Reel (TR) is used.H bridge is provided in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package for the sake of cost savings.Improved reliabilbridge drivery can be ensured based on the supply voltage of 8V~52V.In the way of Surface Mount, H bridge circuit is mounted.-25°C~125°C TJ can work normally at motor driver H bridges operating temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, Stepper Motors, Voltage Regulators as well.H gate is mounted on the PCB using Surface Mount.Among full bridges specific characteristics are Bootstrap Circuit.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 36 terminations.A signal interface uses 36 pins as pronged contacts.Its base H bridge ic number of L6207 is the basis to find more related H bridge ics.For the operation of the H bridge, a voltage supply of 48V is used.The analog IC type of this H bridge is STEPPER MOTOR CONTROLLER.At a specified ambient temperature, the maximum load current that the power supply can provide is 5.6A.Onput current that reaches 5.6A at maximum.The output and power supply pins are flowing wH-bridgeh current 2.8A.The 36 pins of this bridge driver work together to allow it to perform its specific functions.The output of this Hbridge is 4.H bridge motor drivers in the Motion Control Electronics subcategory have a number of similarities.A high degree of efficiency is achieved by maintaining the operating supply voltage at 48V.It is calculated that the Hbridge releases 52V volts.
L6207PD013TR Features
Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6207
Subcategory: 5.6A
Number of Receivers: 48V
L6207PD013TR Applications
There are a lot of STMicroelectronics L6207PD013TR Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Fans
- CD players
- Telecom Microprocessor
- Networking Microprocessor Voltage Regulators
- High-Current DC-DC Point-of-Load Converters
- Small Form-Factor Voltage Regulator Modules
- Desktop Computers
- Voltage Regulators
- High current, low profile DC-DC converters
- Voltage Regulators for GPUs
