L6208PD013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6208 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 4 |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 2.8A |
| Voltage - Load | 8V~52V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6208PD013TR Overview
Drivers controllers includes a Tape & Reel (TR)package.Drivers controllers comes in a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.A mounting position of Surface Mountis recommended for the part.Fits the component connected to General Purpose.Drivers controllers is capable of supplying 8V~52V volts.Regarding the operating temperature, it is in the range of -25°C~125°C TJ°C.In this part, there are 36 terminations available.Voltage can be applied at a rate of 8V~52V volts to the load.The amplifier should be set to 48V.Surface Mountis its recommended mounting method.Set the part's output current to 2.8A.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.According to the L6208part number, the part is found.Drivers controllers is designed wDrivers controllersh 36 pins.This is part of the Motion Control Electronics series.There are 2 outputs available.A voltage of 48V is used as the supply voltage for this driver.Continually maintains the output voltage at 52V.Keeps the output voltage at STSPIN L62at all times.Its maximum output current reaches 5.6Ato meet the operational requirements.Controller ic operates wController ich a supply current of 10mA.On it, there are 4 channels.
L6208PD013TR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6208 number
designed with 2 outputs
L6208PD013TR Applications
There are a lot of STMicroelectronics L6208PD013TR motor drivers applications.
- Landscape lighting
- Horticultural applications
- A cross between entertainment
- High brightness LED lighting
- Step-up or step-down driver topologies
- CHMSL (center high-mount stop lamps)
- Large outdoor LED display
- Dash
- Human-centric lighting
- Emergency lighting
