L6208Q
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tray |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6208 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Nominal Supply Current | 5.6A |
| Output Configuration | Half Bridge (4) |
| Current - Output | 2.5A |
| Supply Current-Max (Isup) | 10mA |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height | 950μm |
| Length | 7.15mm |
| Width | 7.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6208Q Overview
There is a Traypackage included in the design.The part is packaged in a 48-VFQFN Exposed Pad case.Drivers controllers is recommended to mount the part by Surface Mount.I believe it is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 8V~52V volts.Operation temperature ranges from -25°C~125°C TJ.There are 48 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.You should run this amplifier at 48V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Drivers controllers is recommended to keep the part output current at 2.5A.The L6208part number allows us to locate it.48pins are available on the device.This is part of the Motion Control Electronics series.Drivers controllers is possible to access 2outputs.In this case, the output voltage is maintained at 52V.Drivers controllers is maintained at a voltage of STSPIN L62.As a result, we can recognize that the motor type is Stepper.For compliance with the operation requirements, the maximum output current is [0].
L6208Q Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6208 number
designed with 2 outputs
Motor Type classified as Stepper
L6208Q Applications
There are a lot of STMicroelectronics L6208Q motor drivers applications.
- Architectural lighting
- LCD displays
- Digital still cameras
- Hospitality buildings
- Tail lights
- Telltale lights
- Street lights
- Home lighting systems
- Dome
- A cross between entertainment
